box auto updating ? - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

alder191 · 03-03-10, 03:25 PM

i have done my box to the latest pure fix for the fun card, it has the latest 3.7 software on the box, but after about 20 mins the box starts auto updating , and sticks on the tunning screen, turning off and on returns to the updating screen and sticks, but if i leave it switched off for a few hours then switch it it works again until it starts updating again

any ideas ?

jimbo · 03-03-10, 04:23 PM

if its on a splitter remove splitter put feed in direct to box and leave it alone to update, see if that does the job.

alder191 · 03-03-10, 04:28 PM

no not on a spliter, just cant understand why, should i cut the talk back would that help

abbs2002 · 03-03-10, 04:32 PM

Quote:

Originally Posted by alder191

no not on a spliter, just cant understand why, should i cut the talk back would that help

which box is it m8? check the NET ID & FREQ.

jimbo · 03-03-10, 04:35 PM

yes was going to come to that after trying first option lol

jayjayw · 04-03-10, 11:02 AM

Got same issues Here! Applied Updated_toxic_sr20 Fix yesterday on
2 boxes and both down this morning.

Both Stuck on "PAT" and rebooting...

Im thinking sr20 Fix is the cause of it somehow...

alder191 · 04-03-10, 03:50 PM

left mine on over night, seems to be working at the minute, same here i think the fix is causing the re boot

alder191 · 10-03-10, 08:53 AM

started auto re booting again, then staying on tune page for hours

sparky52 · 10-03-10, 09:03 AM

if you take the card out,does it still try to update? if so its nothing to do with the card but perhaps your box has a no-update mod done to it? and that can cause issues? also it may be that your area has just started updating your areas firmware to 3.7 ?.If you have any splitter in line remove that or put the cable directly into the box and see if that helps(as mentioned earlier) .is the box you are using meant for the area you are in?(eg :is trying to update a telewest box in a pure area or cw area)

sparky

alder191 · 10-03-10, 03:23 PM

boxes gone over to 3.7 in the last couple of weeks, yes box is for pure area, its a pace d14001n , yes still does it with card removed, my sammy in the other room works fine ?

03-03-10, 03:25 PM	#1 (permalink)
alder191 Senior Member Join Date: May 2007 Location: uk Posts: 198 Thanks: 9 Thanked 1 Time in 1 Post	box auto updating ? i have done my box to the latest pure fix for the fun card, it has the latest 3.7 software on the box, but after about 20 mins the box starts auto updating , and sticks on the tunning screen, turning off and on returns to the updating screen and sticks, but if i leave it switched off for a few hours then switch it it works again until it starts updating again any ideas ?

03-03-10, 04:23 PM	#2 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 3,773 Thanks: 254 Thanked 891 Times in 554 Posts	Re: box auto updating ? if its on a splitter remove splitter put feed in direct to box and leave it alone to update, see if that does the job. __________________ i now keep copies of some posts before they are deleted, this is a private matter.

03-03-10, 04:28 PM	#3 (permalink)
alder191 Senior Member Join Date: May 2007 Location: uk Posts: 198 Thanks: 9 Thanked 1 Time in 1 Post	Re: box auto updating ? no not on a spliter, just cant understand why, should i cut the talk back would that help

03-03-10, 04:35 PM	#5 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 3,773 Thanks: 254 Thanked 891 Times in 554 Posts	Re: box auto updating ? yes was going to come to that after trying first option lol __________________ i now keep copies of some posts before they are deleted, this is a private matter.

04-03-10, 11:02 AM	#6 (permalink)
jayjayw Member Join Date: Apr 2007 Posts: 88 Thanks: 1 Thanked 0 Times in 0 Posts	Re: box auto updating ? Got same issues Here! Applied Updated_toxic_sr20 Fix yesterday on 2 boxes and both down this morning. Both Stuck on "PAT" and rebooting... Im thinking sr20 Fix is the cause of it somehow...

04-03-10, 03:50 PM	#7 (permalink)
alder191 Senior Member Join Date: May 2007 Location: uk Posts: 198 Thanks: 9 Thanked 1 Time in 1 Post	Re: box auto updating ? left mine on over night, seems to be working at the minute, same here i think the fix is causing the re boot

10-03-10, 08:53 AM	#8 (permalink)
alder191 Senior Member Join Date: May 2007 Location: uk Posts: 198 Thanks: 9 Thanked 1 Time in 1 Post	Re: box auto updating ? started auto re booting again, then staying on tune page for hours

10-03-10, 09:03 AM	#9 (permalink)
sparky52 Senior Member Join Date: Oct 2009 Posts: 140 Thanks: 26 Thanked 23 Times in 23 Posts	Re: box auto updating ? if you take the card out,does it still try to update? if so its nothing to do with the card but perhaps your box has a no-update mod done to it? and that can cause issues? also it may be that your area has just started updating your areas firmware to 3.7 ?.If you have any splitter in line remove that or put the cable directly into the box and see if that helps(as mentioned earlier) .is the box you are using meant for the area you are in?(eg :is trying to update a telewest box in a pure area or cw area) sparky

10-03-10, 03:23 PM	#10 (permalink)
alder191 Senior Member Join Date: May 2007 Location: uk Posts: 198 Thanks: 9 Thanked 1 Time in 1 Post	Re: box auto updating ? boxes gone over to 3.7 in the last couple of weeks, yes box is for pure area, its a pace d14001n , yes still does it with card removed, my sammy in the other room works fine ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How To Differentiate A Genuine & Clone Eurovox EX5000 PVR's	Zemme	Eurovox	79	20-11-09 09:38 AM
V+hd box	nick95255	DBox/Dreambox	1	04-10-09 10:23 PM
New Application: Auto FTP Key Updates to your box	winker	DBox/Dreambox	133	14-03-09 10:55 AM
updating a 1000 box	tottenhamart	Cable TV Chat	3	04-12-08 11:44 AM
auto key entry possible????	DrTech	Eurovox	3	28-11-08 01:48 PM