HP nc6000 Wont Boot up - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

01484 · 05-03-10, 06:38 PM

HI
I thing that is wrong with my laptop is that when i press the power button it turns on you can hear the fan working and the power light comes on, but there is nothing on the screen its blank and the laptop turn off after about 10 secs.
Does anyone know what the problem could be.

Rick9955 · 05-03-10, 09:17 PM

Sounds like hardware error causing shutdown, can you get into bios?? check power supply, check plug connections (both ends and mains plug)

River-Rat · 06-03-10, 11:45 AM

could be over heating, could be graphicscard gone, what was u doing b4 it happened?

01484 · 08-03-10, 01:14 PM

i just plugged it in and turned it on as normal and it just happened not to turn on. I dont even get BIOS dont know why.
At first i thought it was the RAM so i took one out and it turned on and when i finished screwing the keyboard back on and turned it on it went back to the same problem again.
so i dont know whats wrong with it

Rick9955 · 08-03-10, 01:51 PM

maybe when you removed the memory the keyboard didnt "marry" up and is causing an error or the original fitted memory is faulty.
Although if its shutting down before booting i would suspect a power supply problem or a short which is causing the power to shut down because it has detected a fault.

01484 · 08-03-10, 03:30 PM

i found out what the problem is. If you press really hard above the f12 key and then turn the laptop on it turn on fine but as soon as you let your finger go the screen goes black. I think it might be the processor as the processor is under the f12 key section.

River-Rat · 08-03-10, 07:39 PM

have u a pc in the house? connect the laptop to the vga cable on side
and look for the montor key, u normally hit fn+ that key

a mate had this, her screen has gone but will boot up ok to a montor

01484 · 09-03-10, 07:58 PM

HI
no i have tried this but no luck. Its just something wrong the problem seems to be above the f12 key ill have to open it and see why its doing that it might need to be re-soldered again.

Rick9955 · 11-03-10, 12:20 AM

Is the power plug/jack in that area,i have repaired some laptops that have a broken board by the pins that come through from the plug/jack.

01484 · 12-03-10, 01:53 PM

yh its around that area you said but i dont think its a broken board like you are saying. Anyways i will have a look at it tonight and see

05-03-10, 06:38 PM	#1 (permalink)
01484 Senior Member Join Date: Jan 2009 Posts: 152 Thanks: 5 Thanked 46 Times in 17 Posts	HP nc6000 Wont Boot up HI I thing that is wrong with my laptop is that when i press the power button it turns on you can hear the fan working and the power light comes on, but there is nothing on the screen its blank and the laptop turn off after about 10 secs. Does anyone know what the problem could be.

05-03-10, 09:17 PM	#2 (permalink)
Rick9955 Member Join Date: Feb 2010 Posts: 61 Thanks: 2 Thanked 13 Times in 12 Posts	Re: HP nc6000 Wont Boot up Sounds like hardware error causing shutdown, can you get into bios?? check power supply, check plug connections (both ends and mains plug)

06-03-10, 11:45 AM	#3 (permalink)
River-Rat Dogs Body Join Date: Apr 2007 Posts: 2,744 Thanks: 62 Thanked 384 Times in 281 Posts	Re: HP nc6000 Wont Boot up could be over heating, could be graphicscard gone, what was u doing b4 it happened? __________________ A wise man once said " if you don`t ask, you want get"

08-03-10, 01:14 PM	#4 (permalink)
01484 Senior Member Join Date: Jan 2009 Posts: 152 Thanks: 5 Thanked 46 Times in 17 Posts	Re: HP nc6000 Wont Boot up i just plugged it in and turned it on as normal and it just happened not to turn on. I dont even get BIOS dont know why. At first i thought it was the RAM so i took one out and it turned on and when i finished screwing the keyboard back on and turned it on it went back to the same problem again. so i dont know whats wrong with it

08-03-10, 01:51 PM	#5 (permalink)
Rick9955 Member Join Date: Feb 2010 Posts: 61 Thanks: 2 Thanked 13 Times in 12 Posts	Re: HP nc6000 Wont Boot up maybe when you removed the memory the keyboard didnt "marry" up and is causing an error or the original fitted memory is faulty. Although if its shutting down before booting i would suspect a power supply problem or a short which is causing the power to shut down because it has detected a fault.

08-03-10, 03:30 PM	#6 (permalink)
01484 Senior Member Join Date: Jan 2009 Posts: 152 Thanks: 5 Thanked 46 Times in 17 Posts	Re: HP nc6000 Wont Boot up i found out what the problem is. If you press really hard above the f12 key and then turn the laptop on it turn on fine but as soon as you let your finger go the screen goes black. I think it might be the processor as the processor is under the f12 key section.

08-03-10, 07:39 PM	#7 (permalink)
River-Rat Dogs Body Join Date: Apr 2007 Posts: 2,744 Thanks: 62 Thanked 384 Times in 281 Posts	Re: HP nc6000 Wont Boot up have u a pc in the house? connect the laptop to the vga cable on side and look for the montor key, u normally hit fn+ that key a mate had this, her screen has gone but will boot up ok to a montor __________________ A wise man once said " if you don`t ask, you want get"

09-03-10, 07:58 PM	#8 (permalink)
01484 Senior Member Join Date: Jan 2009 Posts: 152 Thanks: 5 Thanked 46 Times in 17 Posts	Re: HP nc6000 Wont Boot up HI no i have tried this but no luck. Its just something wrong the problem seems to be above the f12 key ill have to open it and see why its doing that it might need to be re-soldered again.

11-03-10, 12:20 AM	#9 (permalink)
Rick9955 Member Join Date: Feb 2010 Posts: 61 Thanks: 2 Thanked 13 Times in 12 Posts	Re: HP nc6000 Wont Boot up Is the power plug/jack in that area,i have repaired some laptops that have a broken board by the pins that come through from the plug/jack.

12-03-10, 01:53 PM	#10 (permalink)
01484 Senior Member Join Date: Jan 2009 Posts: 152 Thanks: 5 Thanked 46 Times in 17 Posts	Re: HP nc6000 Wont Boot up yh its around that area you said but i dont think its a broken board like you are saying. Anyways i will have a look at it tonight and see

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dual Boot Vista & XP	Simzter	PC Software	4	17-10-09 12:45 PM
Triple Boot Nightmare!!!!!	jontydog	PC Software	6	21-04-08 11:49 AM
Dbox hanging on boot	donovan2123	DBox/Dreambox	11	12-04-08 01:29 AM
Computer hanging on boot up	Rojo	PC Hardware	17	28-11-07 09:06 PM
Mac OS X boot with Linux	Apple Mac	Apple	0	24-08-06 05:06 PM