I think I bricked my Ambit :(

[King John]

Well, I tried to flash an Ambit 250, and it didn't go so well.. Heres the ttl session:

BCM3349A0
100000010346890
MemSize: ......................... 8M
Flash detected @0xbe000000

Signature: a603


Broadcom BootLoader Version: 2.1.6d release Gnu
Build Date: May 10 2004
Build Time: 19:06:46

Image 1 Program Header:
Signature: a603
Control: 0005
Major Rev: 0001
Minor Rev: 0000
Build Time: 2008/2/21 08:30:58 Z
File Length: 958208 bytes
Load Address: 80010000
Filename: ecram_sto.bin
HCS: 78f0
CRC: 6d857414


HCS failed on Image 2 Program Header


Enter '1', '2', or 'p' within 2 seconds or take default...
. .


Board IP Address [0.0.0.0]: 192.168.100.1

Board IP Mask [255.255.255.0]:

Board IP Gateway [0.0.0.0]:

Board MAC Address [00:10:18:ff:ff:ff]:

Internal/External phy? (i/e)[i]


Init EMAC, DMA, and MII PHY...
Autonegotiation started, waiting for completion...ERROR: Autonegotiation timeout
...
MAC setup for HalfDuplex


Main Menu:
==========
d) Download and save to flash
g) Download and run from RAM
c) Store icePROM bootloader to flash
Boot from
e) Erase flash sector
m) Set mode
s) Store bootloader parameters to flash
i) Re-init ethernet
r) Read memory
w) Write memory

192.168.100.10
Enter TFTP filename []: firmware.bin


Free store: a0500000
Starting TFTP of firmware.bin from 0.0.0.0
Getting firmware.bin using octet mode
Tftp timeout...
Tftp timeout...
Tftp timeout...
Tftp timeout...
Tftp timeout...
Tftp timeout...
Retry limit exceeded on block 1....Aborting session
Store parameters to flash ? [n]


Main Menu:
==========
d) Download and save to f
g) Download and run from RAM
c) Store icePROM bootloader to flash
Boot from flash
e) Erase flash sector
m) Set mode
s) Store bootloader parameters to flash
i) Re-init ethernet
r) Read memory
w) Write memory



Broadcom BootLoader Version: 2.1.6d release Gnu
Build Date: May 10 2004
Build Time: 19:06:46

Image 1 Program Header:
Signature: a603
Control: 0005
Major Rev: 0001
Minor Rev: 0000
Build Time: 2008/2/21 08:30:58 Z
File Length: 958208 bytes
Load Address: 80010000
Filename:
HCS: 78f0
CRC: 6d857414


HCS failed on Image 2 Program Header


Enter '1', '2', or 'p' within 2 seconds or take default...
. .



Main Menu:
==========
d) Download and save to flash
g) Download and run from RAM
c) Store icePROM bootloader to flash
Boot from flash
e) Erase flash sector
m) Set mode
s) Store bootloader parameters to flash
i) Re-init ethernet
r) Read memory
w) Write memory

TFTP Get Selected

Board TFTP Server IP Address [0.0.0.0]: 192.168.100.10
Enter TFTP filename


Free store: a0500000
Starting TFTP of firmware.bin from 192.168.100.10
Getting firmware.bin using octet mode
.................................................. ..............................
.................................................. ..............................
.................................................. ..............................
.................................................. ..............................
.................................................. ..............................
.................................................. ..............................
.................................................. ..............................
.................................................. ..............................
.................................................. ..............................
.................................................. ..............................
.................................................. ..............................
.................................................. ..............................
.................................................. ...............
Tftp complete
Received 2097152 bytes
HCS failed on Image 0 Program Header

Image does not have standard header. Do you wish to store it? [n] y
Programming 2097152 bytes
Enter sector to start store:

******************** CRASH ********************

EXCEPTION TYPE: GENERAL
R0/ZERO=00000000 R1/AT =f0000000 R2/V0 =00000030 R3/V1 =be000000
R4/A0 =000000aa R5/A1 =00000055 R6/A2 =bdffffff R7/A3 =00000000
R8/T0 =00008000 R9/T1 =00008000 R10/T2 =00008003 R11/T3 =00000000
R12/T4 =74000000 R13/T5 =00000000 R14/T6 =00000000 R15/T7 =00000054
R16/S0 =00008003 R17/S1 =81f90000 R18/S2 =0000000f R19/S3 =00000000
R20/S4 =00000000 R21/S5 =00008003 R22/S6 =a0500008 R23/S7 =00000000
R24/T8 =00001021 R25/T9 =00000001 R26/K0 =deaddead R27/K1 =deaddead
R28/GP =fffc7f08 R29/SP =807ffdb0 R30/FP =00000000 R31/RA =81f86358

pc : 0x81f8641c sr : 0x00000002
cause: 0x0000801c addr: 0xbdffffff


Yeah, it asked what sector to start the store, and I didn't put anything. And my ethernet came unplugged in the beginning so there was a timeout. Now all the thing does is sit there with the power light on, and the ethernet light occasionally blinks. Nothing from TTL. Just blankness.

Any ideas?

PS: Sorry, the forum made some smiley faces in here that got deleted cuz people with less than 10 post count can't have images.

[Migz]

yep it bricked mate tsop lift is the only way to get it back up n running

[macky66]

it looks likee you bricked it m8 if u flashing 2meg dump save sector 0 if just firmware save to 1

[King John]

How do I preform a "tsop lift?" What does this accomplish?

[fnr3master]

Originally Posted by King John

How do I preform a "tsop lift?" What does this accomplish?

type in tsop lift on youtube and i will give you a rough idea

[King John]

I just suddenly decided I don't want to do a TSOP lift. Seems to not be worth my time if I could just order another Ambit on Ebay for 10 dollars XD. Thanks for the help.

[sr20]

Originally Posted by King John

I just suddenly decided I don't want to do a TSOP lift. Seems to not be worth my time if I could just order another Ambit on Ebay for 10 dollars XD. Thanks for the help.

get a 5101e mate, or it'll just happen again