Updateing 2

[Graham7]

Information in this post is for educational purposes only.
You can't use it to watch pay TV without subscription.

Create Factory Data
By ncc300.

You can create your factory data file by doing the following steps

With Boxloader 1.2:

Suppose you don`t have channels in the receiver ( 0 channels )
1- switch on the receiver and connect the serial cable
2- open boxloader 1.2
3- click connect
4- click read user data - click OK (a small window will appear to save the text file), name it xxx.txt
5- WAIT TILL IT ENDS!

Now you can edit this text file by notepad
scrol the page and you will see satellite names and transponders
you may insert, delete, modify or reorder desired transponders as you wish
then save

Do the same as above, but this time use the button WRITE FACTORY DATA:

1- switch on the receiver and connect the serial cable
2- open boxloader 1.2
3- click connect
4- WRITE FACTORY DATA
5- WAIT TILL IT ENDS!

Now start configurate your antenna and programs/channels. This way you have modify your factory data.

With FCIS UTILITY:

Also, FCIS UTILITY IS a very nice tool which CAN DO A LOT OF THINGS,

Read user data will save a text file to your pc which contains:
* Dish antenna setting
* ALL TP data
* All TV & Radio channels data

This means you can always save a copy of all your latest settings of
your receiver and download them back to the receiver.

So, in case you have done this already
If you press RESET FACTORY DATA in the main menu,
you will find that all channels and setting are still in the receiver
and they were not erased.


-----------------------------------------------------------------------

If you have FS 7000 e+ or FCIS 7000 e+, you want to wacht N2 Cabo Tv Hispasat 30°W.

You need to upgrade Bootloader (m2.44_FCIS7000E+_BOOTLOADER_UPGRADE.zip) and upgrade Firmware (m2.62_FCIS7000E+Combo_upb.zip)using Utilitytools (MVISIONE+UTILS202.zip)

1. Use MVISIONE+UTILS202 to save your channel
2. Open MVISIONE+UTILS2.02 program
3. click "Upgrade MVisionE + > choose (factory dates) firmware" > Choose "Upgrade boat Loader and firmware" > click "select" > browse Bootloader upgrade > click Upgrade.
4. Look always on the receiver counter display G00D when the upgrading finish and not on your pc and Reboot.
5. Click "Upgrade MVisionE + firmware" > choose "firmware upgrade (Recommended)" > click "select" > browse your 2.62 firmware Update > click Upgrade.
6. Look always on the receiver counter display G00D when the upgrading finish and not on your pc and Reboot.
7. Update your kept channel trick (factory dates) to receiver.
-----------------------------------------------------------------------
FS8000

new version:
FS8000_2.03.zip YOU HAVE TO UPGRADE BOOTLOADER! PLEASE USE NEW DOWNLOAD TOOL MVISIONE+UTILS 2.00 ONLY!
improvements:
1. changed structure and bootloader (included autorization routines for modification of sw. new bootloader will allow to download new sw versions much faster with RS232 nullmodem cable using *.upb compressed files in the future).
2. in simple list, scrambled channels are marked in red colour.
3. smartcardreader supports premiere cards (all type of cards stable)
4. fast EPG



Remember when you update Bootloader all channel are delete!!
Make "load data" before update

-----------------------------------------------------------------------
parental lock reset and factory code 2290
-----------------------------------------------------------------------
Try to get FS-8000 back from being dead.

restart your pc first it work also better in a slower pc
use boxloader 1.2
Switch OFF the receiver from the back switch.
Then use boxloader 1.2 choose upgrade bootloader open 2.10VR_FS8080.bin and not other one!!
Switch ON the receiver immediately from the back and wait a few seconds until it starts upgrading
Try as many times as necessary

if after 10 time it dont work only solution is JTAG

I think is better to send back to the shop you buy
-----------------------------------------------------------------------
Thanks to Artware

Error 0

error 0 = receiver to quick off while updating firmware (interupted)

error 3 = bad connection between computer and receiver

error 4 = wrong firmware

error 6 = error 4 (wrong firmware)

error 8 = wires 2-3 of null modemcable bad contact

-----------------------------------------------------------------------
Fireware.

Modelo FCIS7000 (antigo) pode-se instalar:

x.xx MV_NL (mvision)
x.xx MT_NL (Illusion)
x.xx MT_NLIR (Iris ????)
x.xx MT_GV (goldvision magic titanium)

Modelo FCIS7000 e+ - Hardware AE - pode-se instalar:

x.xx MV_NL (mvision)
x.xx MT_NL (Illusion)
x.xx MT_NLIR (Iris ????)
x.xx MT_GV (goldvision magic titanium)
x.xx MDR (mvision e+)