Menu Secrets

[Ragabbader]

MENU SECRETS

1) Digitare in sequence 8 2 8 2 (appears key editor of all the codifiche of all the channels) (in practical all the content of the softcam k*y that inserted)

2) Digitare in sequence: Right key dumb (up) Key exit (appears the k*y editor of the single one codifies of that channel)

3) Digitare 8280 (k*y editor for the bi*s)

4) Digitare mute+exit+text (visualizes the n*gra boxk*y)

5) yellow Digitare 8282+tasto (visualizes the n*gra boxk*y)

5) blue Digitare mute+exit+tasto (ecm pid = says to you which ecm pid it works on that channel) (a MY CONSIGLIO:LASCIARLO ON CAR)

6) Digitare 0103 Reset Pin. Resetta the Pin of emergency for the access to the several one menu of the receiver. Useful function in the case we had changed it and forgotten.

7) SYMBOLS criptato channel (symbol euro) - audio modality (stereo, selectable left right or... pressing the AUDIO key) - sottotito them (audio key) - teletext (YELLOW key) - audio dolby surround (if active you can use the present relative escape on the back of the receiver) the presence of the icone would have to inform to you less on the presence or than one of the aforesaid characteristics

8) MENU DIAGNOSTIC With the decoder in stand by (visualizes only the hour): a) to press and to maintain pressed key "CHANNEL ^" on frontalino (the left third party from in order meaning to us) b) At the same time to press the ignition push-button (the first one from left) Appears therefore "MENU DIAGNOSTIC", navigable with the remote control. To the successive one riavvio of the decoder the shielded one appears of chosen of the language but all the memorizazioni seem to be maintained. If active the menu diagnostic, they come annulled lat and long, therefore if you have the motorized one and used the USALS you must reimmetterle.

9) AS TO ACTIVATE the MULTICAS a) to go on MAIN MENU b) to go on SYSTEM FORMULATION then (to move itself to right)e to go on FORMULATIONS OF EMERGENCY c) to this point you ASKED VERRA' the PASSWORD (digita pin) that it is 0 0 0 0 (of default) d) you will appear an ulterior one shielded, gone and set up MULTICAS ON ON e) to set up the other voices to your piacimento or On a criptato channel to digitare 6969 and then still 6969 (worked alone on first firmware).

10) AS TO INSERT AES ON MULT*V*SION being on a Mult***sion channel digita on the remote control the DUMB keys [ ] [ EXIT ] and you the shielded one of edit will be opened of the Ke*s of those provider. To this point the first half of the AES you put it in the first line (K*y the 01) and second halves in the second line (K*y 11). You exit and saves.

11) AS TO INSERT the K*Y ON XPLUS and INXCT (THROUGH EDITOR B*SS) you open the editor for keys B*SS (8280) (finding to you on the channel in issue) entered within and posizionate to you on one of the lines... you write first part of the key... gone on the line under and you write the second part... riposizionate to you on before and press exit... magically the channel will be opened... oltretutto look at both logically... you will have to leave house some keys b*ss... you even remember yourselves than to leave that one of tv8... sennò goodbye it postpones (THANKS LEOBLUES) or same procedure but For last the 8 XPLUS byte of the CW is enough while for INXTC the first only 8 save 2 live b*ss (THANKS DAVARCH)

12) MANUAL MODERNIZATION FOR P*LSAT (To follow exactly these complementary procedures or to choose one of these) a) x who did not have time problems, with 8282 posizionati on one of the channels of the bouquet"incriminato", to slide until the 7001, to replace the present index k*y with new indices 10-11-20-21 and then, to the respective lines to insert by hand with editor of the remote control the keys in use attualmente..e to save.

b) the complete and exact MANUAL procedure is that one to write the former indices novo of 7001
10 + key
11 + key
20 + key
21 + key
therefore not only operating. the this will turn out useful in future (next) not being single indices 20 and 21 susceptible ones of variation but also 10 and 11..stando to the current situation. or c) In contrary case, the softcam, change key 10 and 11 and write them equal to the 20 and 21 (thanks KEVINDMITNICK, MESCIUPIPPI)

13) COME INSERIRE LE K*Y SUL GRUPPO SEXWIEW ( TRAMITE EDITOR B*SS)

the exited keys allow to give light to 5c****i XXX of the SexView group, and just SexView 247, SexView DP, SexView Plus, extra Sexview Sex view cum. These keys can be inserted also on our Clarke-tech in the menu biss. The procedure is this: a) Containing Procuratevi rows the keys in issue, as an example v_dcw of Mach1 or the Dreambox Keys modernized today afternoon. b) Syntonized (if you already do not have them) the 3 channels on 12360 H Sr27500 Hotbird 13°Est c) Andate on the channel SexView 247 and digitate 8280 in order to open the biss key editor. d) Scrivete on one line of your choice the first 8 byte, that is the first half, of the key for SexView 247. e) Dates exit and confirmed the new formulations with OK. The channel will become visible. f) Andate on SexView DP and you proceed in the same way (obviously using the appropriate key for DP and writing it on an other line regarding that you have before used FPRIVATE "TYPE=PICT;ALT =") g) Andate on SexView Plus and write this LAST the 8 time byte, is worth to say the second half, of the key for SV Plus. Confirmed the formulations. h) you put also first part of the key for Sex extra View and sex view cum you will see (THANKS HAUTAMEEKI, ROSS1948, WOLF)

14) MANUAL MODERNIZATION FOR D+ (To follow exactly these complementary procedures or to choose one of these) a) with 8282 posizionati on one of the channels of the bouquet"incriminato", to slide until the 4001 (that it is the same thing of 4101), to replace the present index k*y with new indices 10-11-or 20-21 (to second of the operating ones that escono)e then, to the respective lines to insert by hand with editor of the remote control the keys in use attualmente..e to save. b) the complete and exact MANUAL procedure is that one to write the former indices novo of 4001
10 + key
11 + key or
20 + key
21 + key
therefore not only operating. the this will turn out useful in future (next) not being single indices 20 and 21 susceptible ones of variation but also 10 and 11..stando to the current situation. or c) In contrary case, the softcam, change key to 10 and 11 or 20 and 21

Credits go to : artware