Using Image Works Problem

[mrowley]

hello.

Im having some trouble with image works, I have a new sagem dbox with 1xI,
My previous Dbox was a Nokia with 2xI, I had an image on the Nokia that worked perfectly in my area and it has all cams and Cables.xml, and services set up, i could just flash it to the box and away i went. Now i want to put this image on the sagem, so i converted it with imageworks from 2x Without bootloader to 1x without bootloader (i tried With bootloader also but IFA says the file is the wrong size) then flashed it to the sagem.... it flashed fine (took a bit longer but its expected with only one flash)

Now the problem. When i reboot the Dbox Its says on the LCD:

Autoboot: 1
Loading Kernel:


Then just stops with "loading Kernel" on the LCD

My Question is this: Is it due to my conversion in imageworks thats causing the problem or is the image jut incompatible with the Sagem,

Ps. The image is called "the freezing sagem image" or "Sagem2x" - Funny considering!

Pps. Also i have tried other images that are 2x and converted them with IW to 1x but again to no avail.

Any help would be appreciated greatly

Mick.

[lincsat]

That should work OK, try an image that is already for 1x and see if that works.

[mrowley]

THanks for the prompt reply,
I managed to get it sorted with a 1x Pacino Image from the downloads.
Still dunno why it didnt boot, gonna go back and try again once ive backed up the working image, Ill post my findings here in case any other members encounter this problem.

Thanks again.

Mick