Wireless diablo cam update - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

signman · 21-06-08, 04:58 PM

:thumbs_up:
Just updated a wireless cam from 2.2 to 2.3 and found it very easy to do.
Have just loaded latest software on to it and seems to be running ok.
Please note download the update software from the diablo website as this worked for me and you can change the language when paying for upgrade via card payment.

parad0x_i · 21-06-08, 05:00 PM

Good info signman.. am sure it will help those who want to update to their cam.. :thumbs_up:

imported_jumper · 30-06-08, 07:28 PM

what did you use for upgrading? CAS2/3 or maybe twinbase?

signman · 04-07-08, 07:55 AM

Sorry for delay in replying been busy at work.
Used cas3 to update the cam.
The software by duolabs uses cas software to update the cam not tried with twinbase but I think it will not work with this.
Hope this helps

Wolves · 17-07-08, 09:51 PM

@signman.

Is Canal Digital Nordic on 1 degrees west running ok on your wireless, or you got freezing and hang ups on picture?

regards,Wolves.

signman · 18-07-08, 03:34 PM

wolves
Cam is working ok at present on thor and watching all c+ ok as well as kan at present.
The file is und-world 124 in cam decoding most transponders without any freezing could be that if your receiver has its own emu you may wish to turn it off to see if this is the cause.
My receiver is darkbox hd with emu on and cam still working ok
Hope this helps

Wolves · 19-07-08, 03:54 PM

Thanks signman. Glad to here your wireless working fine, cant understand whats wrong here. Using my wireless in Force so no emu to turn off.
What settings are you using in CAS/CONFIG etc.?

signman · 19-07-08, 05:53 PM

wolves try settings as follows in config
lang english
caids file caids
auto pmt on
emulators on
n2 au on
emu prio 1emu 2cards
fixed cw on
debug off
smartcard mess never
multi mess never
delayer 0
leds on
cas all on at present but you can turn them all off if needed just turn on one req for card.
this can also apply to diablo light cam as well

Wolves · 19-07-08, 08:37 PM

Thanks again signman, but still no go using your settings. Picture freezing after 1 minute or so on Canal Digital Nordic :cry_smile: All other providers working fine.

regards,Wolves.

signman · 19-07-08, 10:19 PM

wolves could be you are not getting a strong signal from the satellite I cannot pick up all the canal digtal channels with my dish as it is only 90cm size you need a larger dish for some transponders on thor.

21-06-08, 04:58 PM	#1 (permalink)
signman Junior Member Join Date: May 2008 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	Wireless diablo cam update :thumbs_up: Just updated a wireless cam from 2.2 to 2.3 and found it very easy to do. Have just loaded latest software on to it and seems to be running ok. Please note download the update software from the diablo website as this worked for me and you can change the language when paying for upgrade via card payment.

21-06-08, 05:00 PM	#2 (permalink)
parad0x_i Senior Member Join Date: Oct 2006 Posts: 3,469 Thanks: 0 Thanked 52 Times in 22 Posts	Wireless diablo cam update Good info signman.. am sure it will help those who want to update to their cam.. :thumbs_up: __________________ Tony [No Support by Pm] Dreambox 500s / Clarke-Tech 2100+ / Skystar 2 PCI/ 1M motorised SatCatcher with Tm 2200 Motor & Invacom SNH-031 .3db / Fixed dish on 13E & 19.2E/ Season int v1.4 62ºE - 45ºW Press THANKS BUTTON if you find this post useful.. :thumbs_up: ALL MEMBERS PLEASE READ & FOLLOW SATMOZ RULES & GUIDELINES http://i34.tinypic.com/2likneh.gif http://img187.imageshack.us/img187/3...777/readhc3.gi http://img187.imageshack.us/img187/3820/gunitgv3.png http://img299.imageshack.us/img299/5777/readhc3.gif

30-06-08, 07:28 PM	#3 (permalink)
imported_jumper Junior Member Join Date: Feb 2007 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Wireless diablo cam update what did you use for upgrading? CAS2/3 or maybe twinbase?

04-07-08, 07:55 AM	#4 (permalink)
signman Junior Member Join Date: May 2008 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	Wireless cam update Sorry for delay in replying been busy at work. Used cas3 to update the cam. The software by duolabs uses cas software to update the cam not tried with twinbase but I think it will not work with this. Hope this helps

17-07-08, 09:51 PM	#5 (permalink)
Wolves Uber Sat Guru Join Date: Jul 2006 Location: Gudbrandsdale in front of my Force 536/Fausto 1.43/Diablo Wireless 2.3/Twinbase/1.0 motor dish. Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	Wireless diablo cam update @signman. Is Canal Digital Nordic on 1 degrees west running ok on your wireless, or you got freezing and hang ups on picture? regards,Wolves. __________________ Vantage 8000HD. Force 536 / Diablo Wireless 2.3 / Diablo 2. TwinBase /Cas 3 / Infinity USB Phoenix.

18-07-08, 03:34 PM	#6 (permalink)
signman Junior Member Join Date: May 2008 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	Wireless cam freezing? wolves Cam is working ok at present on thor and watching all c+ ok as well as kan at present. The file is und-world 124 in cam decoding most transponders without any freezing could be that if your receiver has its own emu you may wish to turn it off to see if this is the cause. My receiver is darkbox hd with emu on and cam still working ok Hope this helps

19-07-08, 03:54 PM	#7 (permalink)
Wolves Uber Sat Guru Join Date: Jul 2006 Location: Gudbrandsdale in front of my Force 536/Fausto 1.43/Diablo Wireless 2.3/Twinbase/1.0 motor dish. Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	Wireless diablo cam update Thanks signman. Glad to here your wireless working fine, cant understand whats wrong here. Using my wireless in Force so no emu to turn off. What settings are you using in CAS/CONFIG etc.? __________________ Vantage 8000HD. Force 536 / Diablo Wireless 2.3 / Diablo 2. TwinBase /Cas 3 / Infinity USB Phoenix.

19-07-08, 05:53 PM	#8 (permalink)
signman Junior Member Join Date: May 2008 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	settings wirless wolves try settings as follows in config lang english caids file caids auto pmt on emulators on n2 au on emu prio 1emu 2cards fixed cw on debug off smartcard mess never multi mess never delayer 0 leds on cas all on at present but you can turn them all off if needed just turn on one req for card. this can also apply to diablo light cam as well

19-07-08, 08:37 PM	#9 (permalink)
Wolves Uber Sat Guru Join Date: Jul 2006 Location: Gudbrandsdale in front of my Force 536/Fausto 1.43/Diablo Wireless 2.3/Twinbase/1.0 motor dish. Posts: 141 Thanks: 1 Thanked 1 Time in 1 Post	Wireless diablo cam update Thanks again signman, but still no go using your settings. Picture freezing after 1 minute or so on Canal Digital Nordic :cry_smile: All other providers working fine. regards,Wolves. __________________ Vantage 8000HD. Force 536 / Diablo Wireless 2.3 / Diablo 2. TwinBase /Cas 3 / Infinity USB Phoenix.

19-07-08, 10:19 PM	#10 (permalink)
signman Junior Member Join Date: May 2008 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	freezing wolves could be you are not getting a strong signal from the satellite I cannot pick up all the canal digtal channels with my dish as it is only 90cm size you need a larger dish for some transponders on thor.