CTECH5000 + 5000C Downgrade

[Josh]

This is the downgrade software that takes the box back so it will accept 1.35 and below after you have used 1.38p or 1.43p so far as of todate. You have to use the latest CT RS232 software 1.9.1 posted around here and the instructions are something like this. Rescuing the box via the USB isn't possible hence the RS232 route.

>>
To downgrade to old version, please "CTECH5000C_downgrade.stb" file should be loaded together.
"CTECH5000C_downgrade.stb" will work with both 5000 and 5000C.

For example: load "CTECH5000C_downgrade.stb" and then the suitable correct software


* As you may already know, when the receiver stays in " start up ", you should use PC Tool CTECHUP and RS232 serial cable.
At first, press the "Start" button on PC Tool CTECHUP , and next, just power off and on the receiver, then downloading will be started.

<<

This is my German translated text I saved:

>>
Description: This file " CTECH5000C_downgrade.stb" removes illegal patches! " CTECH5000C_downgrade.stb" 5000C is
suitable for both receivers 5000 and. File into the receiver " CTECH5000C_downgrade.stb" and afterwards the desired
firmware The possibility over RS232 of up-passing on firmware must be present!!

After bring in from " CTECH5000C_downgrade.stb" the receiver still stands in " start up" !

Bring the correct firmware in now with PC tools CTECHUP and a zero-modem cable.

Receivers in the switched off condition to the PC attach.

Correct firmware file under BROWSE, CONNECT and START select press receivers with switch on the back switch on.
<<