Go Back   Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums > Tech Forums > Satellite TV > Satellite Receivers > Other receivers



Other receivers Other satellite receivers.

Reply
 
LinkBack Thread Tools
Old 02-10-08, 10:16 AM   #1 (permalink)
Junior Member
 
Join Date: Sep 2008
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default Anything on Selevision Receivers?

A friend of mine just ordered for a Selevision satellite Receiver, and asked me if it has a Key edit menu, or patch software to upgrade. I would like to know if it has, and where to get it. Or how to enter into the Key Edit menu.

Thanks.:confused_smile:
aleey32004 is offline   Reply With Quote
Old 02-10-08, 12:15 PM   #2 (permalink)
Senior Member
 
parad0x_i's Avatar
 
Join Date: Oct 2006
Posts: 3,469
Thanks: 0
Thanked 52 Times in 22 Posts
Default Anything on Selevision Receivers?

Hi.. sorry but unless this is a clone of another well known receiver then i'm afraid there may not be any patch available for it..

Have a look through my Clones List..


Here:- http://www.satmoz.com/forum/showthread.php?t=38304


:wink_smile:
__________________

Tony
[No Support by Pm]

Dreambox 500s / Clarke-Tech 2100+ / Skystar 2 PCI/ 1M motorised SatCatcher with
Tm 2200 Motor & Invacom SNH-031 .3db / Fixed dish on 13E & 19.2E/ Season int v1.4
62ºE - 45ºW

Press THANKS BUTTON if you find this post useful.. :thumbs_up:

ALL MEMBERS PLEASE READ & FOLLOW SATMOZ RULES & GUIDELINES


parad0x_i is offline   Reply With Quote
Old 02-10-08, 01:35 PM   #3 (permalink)
Senior Member
 
Ragabbader's Avatar
 
Join Date: Jan 2006
Posts: 3,761
Thanks: 4
Thanked 16 Times in 6 Posts
Default Anything on Selevision Receivers?

If I'm not mistaken, this is the receiver which offers internet access, 3D cinema and other hi-tech features. I think it is not patchable.
Ragabbader is offline   Reply With Quote
Old 02-10-08, 05:13 PM   #4 (permalink)
Retired Global Moderator
 
^^COMPASS^^'s Avatar
 
Join Date: Jan 2006
Location: Newcastle
Posts: 11,591
Thanks: 24
Thanked 37 Times in 26 Posts
Default Anything on Selevision Receivers?

Digital video recorder 80 Gb, browse internet
Cannot input keys to watch encripted channels


Code:
www.selevision.net/

POWER SUPPLY

Input Voltage:
AC 90 ~ 250 (10%), 50/60 Hz
Type:
Switching Mode Power Supply
Power Consumption:
Max. 60W (10%)
Stand-by Power:
Max. 10W (10%)

DEMODULATION
Waveform:
QPSK
Input Symbol Rate:
1 ~ 45 Mbit/s
FEC Decoder:
Convolution Code Rate 1/2,2/3,3/4,5/6 & 7/8 with Constraint Length K=7

TUNER & CHANNEL
2 RF Input Connector:
F-Type, IEC 169-24, Female
2 RF Output Connector:
F-Type, IEC 169-24, Female
Frequency Range:
950 ~ 2150 MHz
Signal Level:
-25 ~ -65 dBM
LNB Power & Polarization:
Vertical: +13.5 V, Horizontal: +18 V
Current: Max. 500 mA, overload Protection
22 KHz Tone:
Frequency: 22 4 KHz Amplitude: 0.6 0.2 V
DiSEqC Control:
Version 1.0/1.2 Compatible

VIDEO DECODER
Transport Stream:
MPEG-2 ISO/IEC 13818
Profile Level:
MPEG-2 Main Profile @ Main Level
Input Rate:
Max. 15 Mbit/s
Video Formats:
4:3, 16:9 Letter box (Default)
Video Output:
CVBS (Default), RGB, S-VIDEO
Video Resolution:
720 x 576

AUDIO DECODER
Audio Decoding:
MPEG/MusiCam Layer I & II
Audio Mode:
Single/Dual mono/Stereo

CONDITIONAL ACCESS INTERFACE
Common Interface 2 slots

HDD STORAGE & RECORDING TIME
80 GB
40 Hrs in 4 Mbps bit rate

MODEM & ETHERNET
Modem:
56K Voice, Data & Fax
Ethernet:
Ethernet 10/100 Mbps Port

SCART

TV SCART:
Video Output (CVBS, RGB, S-VHS)

Audio Output (Resolution: 20 bits DAC, Max. 2 Vrms)
VCR SCART:
Video Input (CVBS) Video Output: (CVBS, RGB, S-VHS) Audio

Input/Output (Resolution: 20 bits DAC, Max. 2 Vrms)

RCA
Video RCA:
1 RCA/Cinch, Video Output (CVBS)
Audio RCA:
1 Pairs (Left & Right) RCA/Cinch Volume and Mute Control (Resolution: 20 bits DAC, Max. 2 Vrms)

DATA PORT
RS-232C 9-pin D-sub
Transfer rate 115 Kbps


FRONT AND REAR SUMMARY
FRONT
Slot
2 CI slots
Buttons: 7 buttons
Standby, Menu, Exit, CH+, CH-, V+, V-
Display: 3 LED
Standby (R), LAN (R), HDD (R)
USB 1 Port
(slave) Version 1.1

REAR
Power SocketSCART
1 for TV, 1 for VCR
Audio
1 pair of RCA (Left/Right)
Video
1 RCA for CVBS out
Data Port
1 RS-232C (9-pin D-sub)
LNB
2 RF Input & 2 Loop through Output
S/PDIF (OPTIC)
(IEC 95 1, Digital audio output
Ethernet Port Telephone
1 Input and 1 Output (pass through)

PHYSICAL SPECIFICATION
Size (W x H x D)
400mm x 65 mm x 297 mm
Weight (Net)
3.5 kg without HDD
Operating Temperature
00c ~ +450c
Storage Temperature
-100c ~ +700c

ACCESSORIES
Remote control Unit including batteries
User and Operations manual
Cables: Power, RCA, RF, Telephone
Splitter Socket for Telephone pass through connection.
__________________
Satmoz Admin





^^COMPASS^^ is offline   Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT +1. The time now is 01:38 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0 ©2011, Crawlability, Inc.