Tech 6900 & Diablo cam - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

tmull · 18-11-08, 05:46 PM

As an owner of a Humax iCord that is having problems with the Diablo Cam since UW 129 could I pose a question here in the Technomate section. I have been offered a good deal on a 6900 Hd and will buy if my Diablo will work in it. Any advice greatly appreciated.TMULL

^^COMPASS^^ · 18-11-08, 06:13 PM

Quote:

Originally Posted by tmull

As an owner of a Humax iCord that is having problems with the Diablo Cam since UW 129 could I pose a question here in the Technomate section. I have been offered a good deal on a 6900 Hd and will buy if my Diablo will work in it. Any advice greatly appreciated.TMULL

Well i don't own a Technomate 6900 HD myself but from a reliable source confimed to me that it works well with a Diablo cam :regular_smile:

The same cannot be said for the M2+ card as it doesn't work in the receivers card reader ! :sad_smile:

Ps have you checked out our sponser as Ian try's not to be beat on price

http://www.southernsat.co.uk/

s40t5 · 21-11-08, 09:23 PM

Hi everybody.

To "tmull":
I have the same problem with my Humax Icord HD PVR as you have. But I can not clear any channels on Thor 1 dgr west besides the free one. Which channels can you see and which settings do you have in the cam configuration menu?

My english is not perfect... :O

Thanks.

//s40t5 from Sweden

PS. The text below, have I sent to the Diablo crew team at diablocam... DS.

---->>
I have bought a Diablo light and a Cas3+ burner. The Diablo cam is not function in my Humax Icord HD PVR on Thor 1 degree west (Canal Digital). Have tested with lots of Underworld up to 145. On my Relook 400 PVR it is no problem at all, it clear all Canal Digital channels on Thor 1 west. I have also put in the latest firmware (HDPVR1.00.13.hmx) in my Humax Icord. Have also tested different settings in the cam configuration without any positive results.

In some forums they say that up to Underworld 129 there was no problem between Icord and Diablo. What has happen after UW 129? Is this something that the Diablo crew team can fix? Or is the Diablo useless for all Icords?

Regards
---->>

Duolabs were very fast to reply. The answer I get was…

---->>
We take note of this and we will check it out

Thank you

Riccardo
Duolabs Spa
---->>

tmull · 29-11-08, 10:09 AM

Have now downgraded my iCord to second box as I have bought myself a Technomate 6900 HD. Is there a guide on the forum for upgrading patchs,firmware,ect ? TMULL

Siege · 29-11-08, 03:04 PM

I don't have this receiver myself so these instructions have been lifted from elsewhere,...as usual if you are not cetain about what you are doing,..take further advice,...regards

To Download software/keys/channel list by USB: Menu - USB - Data Transfer (takes 30secs for software!)

humax2008 · 30-11-08, 11:33 AM

Hi s40t5:

I have the same problem as you about the Icord and the diablo cam. I now tried all the firmaware releases for the icord:

V 1.00.00
V 1.00.03
V 1.00.07
V 1.00.13

I am running Loader Ver U7.03, i have tried to change for U7.02 but i was not able to load it into the receiver.

None of this software was able to open up anny conax channels with the UW 148.

My Diablo cam will not work with my orginal viasat gold card either.

I think it is the software in the Icord thats the problem.

We Icord owners have to stick to getter!!!

18-11-08, 05:46 PM	#1 (permalink)
tmull Senior Member Join Date: Feb 2006 Posts: 104 Thanks: 1 Thanked 1 Time in 1 Post	Tech 6900 & Diablo cam As an owner of a Humax iCord that is having problems with the Diablo Cam since UW 129 could I pose a question here in the Technomate section. I have been offered a good deal on a 6900 Hd and will buy if my Diablo will work in it. Any advice greatly appreciated.TMULL

21-11-08, 09:23 PM	#3 (permalink)
s40t5 Junior Member Join Date: Nov 2008 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Same problem on Humax Icord HD PVR Hi everybody. To "tmull": I have the same problem with my Humax Icord HD PVR as you have. But I can not clear any channels on Thor 1 dgr west besides the free one. Which channels can you see and which settings do you have in the cam configuration menu? My english is not perfect... :O Thanks. //s40t5 from Sweden PS. The text below, have I sent to the Diablo crew team at diablocam... DS. ---->> I have bought a Diablo light and a Cas3+ burner. The Diablo cam is not function in my Humax Icord HD PVR on Thor 1 degree west (Canal Digital). Have tested with lots of Underworld up to 145. On my Relook 400 PVR it is no problem at all, it clear all Canal Digital channels on Thor 1 west. I have also put in the latest firmware (HDPVR1.00.13.hmx) in my Humax Icord. Have also tested different settings in the cam configuration without any positive results. In some forums they say that up to Underworld 129 there was no problem between Icord and Diablo. What has happen after UW 129? Is this something that the Diablo crew team can fix? Or is the Diablo useless for all Icords? Regards ---->> Duolabs were very fast to reply. The answer I get was… ---->> We take note of this and we will check it out Thank you Riccardo Duolabs Spa ---->>

29-11-08, 10:09 AM	#4 (permalink)
tmull Senior Member Join Date: Feb 2006 Posts: 104 Thanks: 1 Thanked 1 Time in 1 Post	6900 HD aquired Have now downgraded my iCord to second box as I have bought myself a Technomate 6900 HD. Is there a guide on the forum for upgrading patchs,firmware,ect ? TMULL

29-11-08, 03:04 PM	#5 (permalink)
Siege Senior Member Join Date: Jul 2008 Posts: 2,354 Thanks: 9 Thanked 10 Times in 7 Posts	Tech 6900 & Diablo cam I don't have this receiver myself so these instructions have been lifted from elsewhere,...as usual if you are not cetain about what you are doing,..take further advice,...regards To Download software/keys/channel list by USB: Menu - USB - Data Transfer (takes 30secs for software!)

30-11-08, 11:33 AM	#6 (permalink)
humax2008 Junior Member Join Date: Nov 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Tech 6900 & Diablo cam Hi s40t5: I have the same problem as you about the Icord and the diablo cam. I now tried all the firmaware releases for the icord: V 1.00.00 V 1.00.03 V 1.00.07 V 1.00.13 I am running Loader Ver U7.03, i have tried to change for U7.02 but i was not able to load it into the receiver. None of this software was able to open up anny conax channels with the UW 148. My Diablo cam will not work with my orginal viasat gold card either. I think it is the software in the Icord thats the problem. We Icord owners have to stick to getter!!!