How to patch 1000 Series - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

^^COMPASS^^ · 03-12-08, 09:45 AM

Guide to Downloading Magic's Patch for 1000 Series!

Double click the loader "funny face" and Darkman "TM1000 Series" box appears. Make sure "download" is selected, and click on "Browse" and select your patch, and click "Open"
Using remote control now switch Technomate receiver "on" and then click "Auto Detect"
Box now reads "Found stb at com 1" (or what ever).
Version 2.84 detected (or what ever version you have selected), click "Exit".
Press "Connect" and click "Start".

Patch will now be downloaded to your receiver, and you will see the percentage of the download on you PC and receiver window.
First it will send, then erase the old patch, and then write.
When done click "Finish".

On receiver press "Menu" and go to "System Information" and press "O.K".
It should show "cas menu", if not with your remote control type 2004 (2-0-0-4) till it shows.

That's it finished.
Exit "Menu" and remove null modem cable, and replace VCR/AUX scart if removed.

Now check for all your new channels.

Thanks to fearona for this tutorial

03-12-08, 09:45 AM	#1 (permalink)
^^COMPASS^^ Retired Global Moderator Join Date: Jan 2006 Location: Newcastle Posts: 11,591 Thanks: 24 Thanked 37 Times in 26 Posts	How to patch 1000 Series Guide to Downloading Magic's Patch for 1000 Series! Double click the loader "funny face" and Darkman "TM1000 Series" box appears. Make sure "download" is selected, and click on "Browse" and select your patch, and click "Open" Using remote control now switch Technomate receiver "on" and then click "Auto Detect" Box now reads "Found stb at com 1" (or what ever). Version 2.84 detected (or what ever version you have selected), click "Exit". Press "Connect" and click "Start". Patch will now be downloaded to your receiver, and you will see the percentage of the download on you PC and receiver window. First it will send, then erase the old patch, and then write. When done click "Finish". On receiver press "Menu" and go to "System Information" and press "O.K". It should show "cas menu", if not with your remote control type 2004 (2-0-0-4) till it shows. That's it finished. Exit "Menu" and remove null modem cable, and replace VCR/AUX scart if removed. Now check for all your new channels. Thanks to fearona for this tutorial __________________ Satmoz Admin