How to patch TM6800/6900 super via usb stick

[^^COMPASS^^]

This is how to load official software and patches,softcam key files with a memory stick
************************************************** **************
FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************************************** *********************
from the forum first download the correct patch for your receiver, and then open the zipped folder and remove the patch [a small square with a small yellow face on it]. Also download latest Softcam and unzip [on some windows
operating software like windows vista you will see the software and patches a white square]
ready to transfer the patch onto your usb memory stick. next insert your usb memory stick
in the usb port under the front flap and then turn the receiver on to a free to air channel ready to load the patch. then press the usb button on your remote. on the next screen go to data transfer and click>ok now you will see a panel with the patch on it, it will highlight,
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
Load the softcam the same way
************************************************** **********************
you also load softcams /channel lists /official software etc: in exactly the same way by selecting the item you want to load.

Thanks to Rumpole for info