How to load patches/softcams etc for TM5000 series usb and TM5000 series Super usb - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

^^COMPASS^^ · 03-12-08, 09:53 AM

This is how to load official software and patches,softcam key files with a memory stick
************************************************** **************
FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************************************** *********************
From the forum first download the correct patch for your receiver,
(Then open the zipped folder and send the patch to the usb stick. Also download latest Softcam and unzip and send to usb stick]
You are now ready to transfer the patch/softcam onto your receiver. next insert your usb memory stick in the usb port under the front flap and then turn the receiver on to a free to air channel ready to load the patch. then press the usb button on your remote. on the next screen go to data transfer and click>ok now you will see a panel with the patch on it, it will highlight,
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens. you have now loaded the patch,
Load the softcam the same way

Thanks to fearona for this tutorial

03-12-08, 09:53 AM	#1 (permalink)
^^COMPASS^^ Retired Global Moderator Join Date: Jan 2006 Location: Newcastle Posts: 11,591 Thanks: 24 Thanked 37 Times in 26 Posts	How to load patches/softcams etc for TM5000 series usb and TM5000 series Super usb This is how to load official software and patches,softcam key files with a memory stick ************************************************ ********** FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL there are various models and only the correct patch will work or even load on your model ********************************************** ***************** From the forum first download the correct patch for your receiver, (Then open the zipped folder and send the patch to the usb stick. Also download latest Softcam and unzip and send to usb stick] You are now ready to transfer the patch/softcam onto your receiver. next insert your usb memory stick in the usb port under the front flap and then turn the receiver on to a free to air channel ready to load the patch. then press the usb button on your remote. on the next screen go to data transfer and click>ok now you will see a panel with the patch on it, it will highlight, press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens. you have now loaded the patch, Load the softcam the same way Thanks to fearona for this tutorial** __________________ Satmoz Admin