sagem issue

[cam9765]

hi i have a sagem with the Dons image on it
i put this on to stop the freezing i was advised ?
but now if i change channels it display the channel and sound but no picture , if i go out of this channel quickly and back to it the picture is there , it happens on a 20ish or more channels
ucode is set to 0014
does any one have any ideas ?
thank you

[lincsat]

Try a different ucode or a different image

[cam9765]

have tried 0014a 001a votex and built in
also have tried linscat 3.1 and 3.5 sportster
any ideas

[lincsat]

Do they all give the same problem of sound but no picture? That is usually cured by changing the ucode. you could also try switching SPTS mode to off and checking the avia driver is set to 600

[cam9765]

where do i find those settings SPTS i am using the dons image

always sound no picture flick out off the channel and back picture will show strange only on sagems not nokias ?

[cam9765]

lincsat can you help with this
i have a pace 4000 and card on TW
what software card flasher hardware tuts do i need
or where can i find them
thanks

[lincsat]

Originally Posted by cam9765

where do i find those settings SPTS i am using the dons image

always sound no picture flick out off the channel and back picture will show strange only on sagems not nokias ?

I've never used the dons image, but on most newer images it's in settings/driver+boot options - you could try changing the other options in there to see if anything helps.

Originally Posted by cam9765

lincsat can you help with this
i have a pace 4000 and card on TW
what software card flasher hardware tuts do i need
or where can i find them
thanks

I'll post some tuts shortly, I strongly suggest that you don't modify your subscribed box.