Firmware 500 plus - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

brippi68 · 01-01-09, 05:14 PM

Here's how to make the upgrade of DM500 + via Browser

1) Turn on the receiver and activate DHCP (make sure that the router is enabled as a DHCP server) and then remember the IP address assigned to the decoder;

2) Unplug the power cord to the receiver;

3) Hold down the button on the front of the decoder and reintegrated in the power cord;

4) When the LEDs start flashing the left button and open the browser, enter the IP address of the receiver (the one you noted in step 1)

5) The browser will show you going to upgrade the decoder, click on the bottom and select upgrade the firmware, came to 100% simply press the button on the front of the receiver and start the new img after a few seconds.

01-01-09, 05:14 PM	#1 (permalink)
brippi68 Senior Member Join Date: Jan 2006 Posts: 1,972 Thanks: 1 Thanked 4 Times in 4 Posts	Firmware 500 plus Here's how to make the upgrade of DM500 + via Browser 1) Turn on the receiver and activate DHCP (make sure that the router is enabled as a DHCP server) and then remember the IP address assigned to the decoder; 2) Unplug the power cord to the receiver; 3) Hold down the button on the front of the decoder and reintegrated in the power cord; 4) When the LEDs start flashing the left button and open the browser, enter the IP address of the receiver (the one you noted in step 1) 5) The browser will show you going to upgrade the decoder, click on the bottom and select upgrade the firmware, came to 100% simply press the button on the front of the receiver and start the new img after a few seconds. __________________ If you like my work, click on the "Thanks:embaressed_smile: I do not ask reward! You leave your thanks!