How to Patch your TM6800HD (Not Super)

[^^COMPASS^^]

Hi & congrats on your purchase of Technomate receiver.


Lets run through the necessary steps to get you up and running


1. you will need to download the correct patch for you receiver
which you can find here : http://www.satmoz.com/forum/showthre...228#post193228

2. next download the latest softcam
which can be found here : http://www.satmoz.com/forum/showthread.php?t=15875

3. you will need a usb memory stick of a minimum of ( 1GB in my opinion )
Open the zipped folders and send both Patch & Softcam to the usb stick.


4.You are now ready to transfer the patch/softcam onto your receiver.

5.Next insert your usb memory stick in the usb port of your receiver and then turn the receiver on to a free to air channel ready to load the patch.

TM-6800 non super upgrade procedure:





update procedure for 6000 series (super and non super) are simular
USB stick fat32 formatted or it is not recognised

press the USB key, left above menu key
(this brings you in the USB menu)

select Data Transfer

select [/volume 0]

select the .STB file and press ok

it writes several times to 6000 series (up to 5 times),

wait until the technomate reboots,
don't remove usb key or power down before.

same procedure for softcam select .key file and press ok



regards,

Credit for this tutorial goes to JGruuthuse