Ajp's_Manhattan_ST500 Discussion

[imported_ajp]

Hi skomedal I have looked at post 4 and set my diablo as the same and it does not work for me. I use a manhattan plaza st500and I am set on 5east and have never got hustler to clear annoying for me especially when i see posting telling me that hustler clear on 5east

regards

Andrew

[skomedal]

Hustler @4.8e

12111H---sr 27500--- fec 5/6---dvbs--- qpsk...


Try a manual search for this..

Good luck

Regards

[imported_ajp]

Hi M8 have done the other day and all that happens is my search goes to 19.2 and does not find anything on that freq. I will have to do a blind search one day and have a look.

thanks

Andrew

[skomedal]

Originally Posted by ajp

Hi M8 have done the other day and all that happens is my search goes to 19.2 and does not find anything on that freq. I will have to do a blind search one day and have a look.

thanks

Andrew

Hi Andrew

Try going to the 4.8e location and if you have access to your dish disable the motor, by bypassing the motor and going direct to the lnb with an extra coax,, tune the channel then save it in the box, connect motor again,, then do a search for this channel using the step option for the motor, set step first to 7 then if you receive a signal reduce step to 1 and fine tune the dish,, remember to save location when fine tuned..

Hope this helps

Regards

[^^COMPASS^^]

Ajp Help us to help you by giving a little more info

Can you tell us what channels you get on Sirus 5E Fta or encrypted

Just so we can eliminate the possibility you not on sirus.

[imported_ajp]

don't mean to be a pain but in my channel search section there is no 4.8e that I can goto. There is no 4.8e in the advance search either.

I probably won't respond again so look forward to hearing from u again

Thanks

Andrew

[imported_ajp]

Hi compass I have an idea that I am not on 5 east properly as when I move the dish from 19.2 to 5 east the dish does not seem to move yet some of the listings differ between 19.2 and 5 east

Andrew

[^^COMPASS^^]

Go to EDIT
menu and select Satellite / TP Edit>
Select Satellite or TP option>

TO ADD A SATELLITE

Select Satellite option>
Select Add and press OK>
a keypad will appear>
Select character and press OK>
After naming press EXIT>
The new satellite will be entered at the bottom of the list>
Now enter the Angle of the satellite using 0-9 keys>
After this press EXIT>
Then store the settings.



TO SORT SATELLITE LIST

After adding a satellite>
select Sort and press OK>
The list will be sorted by satellite positions in degrees>
STORE>
After all above settings and exiting>
move down to STORE and press OK.

TO RENAME A SATELLITE

Select Rename and press OK>
Select the satellite you want to rename and press OK>
A keypad will appear>
Select character and press OK>
After naming press EXIT>
Then store the settings.

Regards Dave...

[imported_ajp]

Hi compass tried all that u mentioned in the info u sent and I think I found 4.8 east searched but did not find hustler in the search even with the 12.111 freq u gave me, all it searches is free stuff.

It's quite taxing on the brain when trying to work this stuff out especially when u read that everyone else is picking up these channels and can watch them.

thanks for help speak next time

regards

andrew

[skomedal]

If you think you have found Sirius @4.8e.

And only getting the FTA channels, then name them so we can confirm you are on the correct sat...

Regards