ca error on my clone 800hd

[imported_steve29662]

messed up my dreambox 800hd what i got for Christmas, tried to put some boquets on it and sent my old dreambox 500 settings too, then it started to hang on boot and showed the splash screen then the screen on the front of the box went off, with just a red light flashing, so i thought I would put a new image on it NabiloBlackHole_DM800_012 via webpage and now get ca error message, so i connected to dreamup via a cable and it show up my box, box type dm800, but then a error comes up " is not valid integer value" can anyone help, can't connect via ethernet anymore !!!

please help regards Steve

[chips]

Originally Posted by steve29662

messed up my dreambox 800hd what i got for Christmas, tried to put some boquets on it and sent my old dreambox 500 settings too, then it started to hang on boot and showed the splash screen then the screen on the front of the box went off, with just a red light flashing, so i thought I would put a new image on it NabiloBlackHole_DM800_012 via webpage and now get ca error message, so i connected to dreamup via a cable and it show up my box, box type dm800, but then a error comes up " is not valid integer value" can anyone help, can't connect via ethernet anymore !!!

please help regards Steve

Hi steve

How did you use dream-up, with a ethernet cable or a null modem ?
If you unplug the power from the dreambox, press and keep holding in the power button, plug in the power, and keep holding the power button until "stop" is displayed on the screen of the dreambox, the IP should then flash, use this IP address to try and flash another image via the web interface, try to access the web interface whilst the box is still in flash mode, before it boots up. Its best to use a wired connection and to avoid using a wireless PC. If this doesn't work, use a null modem cable with dream-up and try to flash another image.


Hope this helps



Chips