Eurovox Max Picture/Sound Problem

[rickicspurs]

hi, i get b*c hd but picture is blurry, if i get hd box will this chanel work properly, thanx

[Lord Lucan]

Just printed off scanning instructions that are absolutely invaluable to me. At present I only have 28 channels so thank you very much.

The instructions are clear so thank you Nigel No Vice Bennyboy and RP3X and anyone else that posted.

I will let you know how it goes..

[dsglcl]

hi i just bought 1 but cant get anything up do i have to have cable in to use it i was told it was just plug and play works everywhere plz help

[chathaz]

Hello mate i'm new to this site. I was wondering if you could help me, I have a eurovox max v and it will no loger give me channels. i have had people telling me different ways of scanning but it doesn't seem to work. The sign comes up saying 'please wait code being updated'.
We have gone through all the scans even by clearing the data but nothing seems to be working. I would really appreciate your help and advice. Much appreciated.

Originally Posted by Nigel No-Vice

it was on 6.952 changed to 6.887 as per instructions that came with box.

Scanning the box for channels

Power the box up

Firstly and before you start toscan the box you need to - Press Menu - Go to config - Go to clear data (PIN number 0000 (factory set on mine) as always) select erase all channels, are you sure - YES. wait a few seconds then press exit twice

Next step is power scan

In the menu Go to Installation (PIN 0000), Press the yellow buttonon the remote and the push right to change mode from norm to FULL, and then press OK, the power scan will start and should take approx. 30 mins at the most, let the codes update and wait for a random channel to appear. you should receive on average 220 - 250 channels.

You now need to switch to a non free channel ie. sky sports, and let the box update the codes this could take 5 mins be patient, thats it all channels unlocked.

However

If you do not get all the channels there is a further adjustment you can make to ensure you get all the channels that your area can receive.

Go to menu


Then user Installation


Type 0000 user PIN number


Press yellow button power scan


then change the mode to normal


Then arrow down to the symbol rate and if its 6.952 then change it to 6.887 (or vice versa)


Then press OK and it will carry out a scan like the power scan before


If after you tried this and you are still a few channels short then keep the symbol rate at the new figure but just adjust the scan to FULL and try again.

hth