Eurovox Max Picture/Sound Problem

[pokerpool]

try doing powerscan on symbol rate 6.952 if it is already set to that try 6.887 or other way round if at 6.887 also if you have a splitter on scan it b4 splitter on incoming line

[blaze2310]

ah i see, ive tried both codes, one gives me nothing. The other one, while giving me lots of good channels misses out ITV, channel 4, channel 5 and quite a few others, is there any way of getting the frequencies and adding them manually or anything? will reflashing the box help? sorry but im a complete novice, any help is much appreciated!

[racky29]

if your not picking up as many channels as you should be, have you got the latest firmware 15/03/2007, cos there may be an issue with this version,
try this and see how you get on.
manually edit your frequency table and change them all to 1.000 mhz difference, so 130.000 mhz change to 131.000 mhz and so on all the way down the list,
and then do a re scan, you shold get a better response.

also i managed to reduce jitter/squeak by replacing the original telewest regal 2 way splitter
with a new one from maplin, and its perfect now.

http://www.techwatch.co.uk/dbox2-eur...7-red-box.html

[techman]

hi

just wanted to know if anyone knew if the eurovox max works only on digital TV's as i am getting no sound on my loop conection.


Thanks

[Manc_Red]

Hi Guys.....

All of the problems above ive experienced especially picture problems, trial and error has got me to a stage where ive a good knowledge of this cable box, For those in Dublin using this box with Cho*** and N** here is something that might help....

Symbol Rate is Always 6.887

Frequency: 291, 299, 307, 315,323,339,347,355, 363, 371, 379, 387, 395.

Eurovox : Press - MENU, INSTALLATION, USER INSTALLATION

Enter the 13 Channels with Symbol Rate as above, Press OK then AUTO SCAN (red button)

Channels should be all there but only viewable once Correct Software is entered.

[liam1289]

I done that step by step instuction on page 1 on power scan and its mucked my box right up. I now dont get any channels all i get is Channel unavailable and when i scan i dont get anything. When i do a factory default it scans and then says check cable status and then nothing. I fear that ive lost £100 for nothing. Is there a way of getting my channels back? and evey time a go to full power scan it only say quality 8%

please help

[adevgun]

Right guys

i had a similar problem and rectified it by chopping the screw on connector off and putting a normal aerial type connector on. the problem i was getting was occuring because the cable shielding was not making contact with the outer core of the connector im presuming the outer core is the earth.

give this a go. tho instead of choping the cable tv screw on connection. do it on ur extension cable. ensure the earth makes contact with the outside part of the connector and none of the thin shielding wires are making contact with the inner core,

Kind regards


Ammo

[emmanneil]

what you need to do is before you update to the oct update get a channlel dump (a cdf File ) from your machine , update to the oct update and then transfer the cdf file back onto it for anyone that is is the wembley area pm me and i will send you the cdf file if you are on tellypest if not then i can not help you any more questions then please dont hessitate to post a message on here and i will tryto help

[mick26]

hi guys,

total newbie here i would like to know a bit more about this box,

1.do you still need a dish for the sky channels.

2.if aerial do you just get the freeview channels

i have got more questions but lets get these two out of the way first

if this thread is against the rules,could someone pm me please for more info

i apolgise if this is posted in the wrong section

[concaster]

Originally Posted by mick26

hi guys,

total newbie here i would like to know a bit more about this box,

1.do you still need a dish for the sky channels.

2.if aerial do you just get the freeview channels

i have got more questions but lets get these two out of the way first

if this thread is against the rules,could someone pm me please for more info

i apolgise if this is posted in the wrong section

hi mick26 this box is a cable tv tv reciever i:e: must have a cable tv connection,once you have this no sky box or ariel connection required hope this helps