sammy 2100

[chris31560]

hi guys does anyone know wot chip to lift to sort out the net id thanxs..

[Lacutas]

why dont you just short the battery, if you live in pure area,it will reset the netid itself, other areas use funcard netid setter

[chris31560]

hi m8 the box is in a t/w area so it needs a chip lift, thanxs..

[BL4K3Y]

Originally Posted by chris31560

hi m8 the box is in a t/w area so it needs a chip lift, thanxs..

Wrong, there's a button combination to reset that box. Hold left, right, standby and OK, connect the power cable and release the buttons when you see LD:06 on the display, this will reset the box and you will need a Funcard or JTag to set the Net ID.

[yusuf_gaz]

Hi

Just like add to above replies which are both correct but would go with Blakeys reply as you dont have to open the box only thing is the 2100 I think goes to ld05 and the 2110 to ld06.

If you have trouble resetting with method suggested then do as Lacutas has said and use the funcard method to set netid to your area and away you go.

Regards