Go Back   Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums > Tech Forums > Digital TV > UK Cable > Cable Modems



Cable Modems Gotta start somewhere and here's the place to start :)

Reply
 
LinkBack Thread Tools
Old 23-04-10, 09:52 AM   #1 (permalink)
Junior Member
 
Join Date: Jul 2008
Posts: 9
Thanks: 0
Thanked 5 Times in 4 Posts
Default Guide and question for UPC Ireland

Hey All,
I would like to add my experience with the modding scene and UPC Ireland.

I bought a Motorola surfboard 5101e. I made a JTAG cable using the schematic shown here: http://i43.tinypic.com/15wnsk7.jpg

I then connected it all up, installed "JTAG utility 1.3 by ToM" on the PC, and flashed with haxorwarellrev39-LITE.bin (available in the downloads section of this forum), using the flashing directions that came with the file.

When it said flashing complete, I rebooted the modem, went to 192.168.100.1, and was happy-out to be greeted with the haxorware web gui.

So I conected the modem up to the "Tv" socket on the "NTL" labelled box on the wall, and rebooted the modem. After searching for a bit (have a look in the top right corner of the web gui or the overview page for the modems status), it completed the following one after the other:

Acquire Downstream Channel Done
Obtain Upstream Parameters Done
Upstream Ranging Done
Establish IP Connectivity Done
Retrieve Time of Day Done
Negotiate security Done
Receive configuration Done
Register connection Done
Cable modem status Operational

However, further down the page, i noticed that the Configuration file that the device recieved was called "cm_unknown.bin". So I went to the Addresses page of the webgui, and bumped up the mac address of both the ethernet and the HFC by two places i.e "HFC: 34:34:34:34:34:34" became "HFC 34:34:34:34:34:36". I then clicked on save and reboot.

After doing this three times, The modem eventually received a "cm_express.bin" configuration file. Then i unplugged the ethernet from my PC, waited a bit, plugged it back in, and noticed that the PC got a new IP address. Then I was able to connect to the internet.

Im currently downloading at 1mb (i.e, i get a full 700mb iso in about 5min) I tried bumping up the HFC mac address a few times, and managed to get a "cm_starter.bin" configuration file, but didnt notice any change in speed. Now, the question i have is, How do i get faster speeds?

Thanks!
SchrodingersCat is offline   Reply With Quote
Old 23-04-10, 09:58 AM   #2 (permalink)
G77
Super Moderator
 
G77's Avatar
 
Join Date: May 2008
Posts: 6,118
Thanks: 695
Thanked 1,250 Times in 1,044 Posts
Default Re: Guide and question for UPC Ireland

what does the speed test like on speedtest.net?
__________________
1M Motorised Dish, 45W-36E, DM800HD.
Quad LNB Mesh Mini Dish, 28.2E, DM500, TM500.
Samsung Galaxy S GT-I9000 XXJVU & CF-Root.
G77 is offline   Reply With Quote
Reply

Bookmarks

Tags
upc ireland config 5101e

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Newbie question (ive studied though!) basscrazy DBox/Dreambox 8 27-08-09 10:53 AM
I know this question was asked before millions of times kalababa Satellite Help 5 16-12-07 06:51 PM
question on magnetic variation synonym Satellite Help 14 11-07-07 04:41 PM


All times are GMT +1. The time now is 02:24 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0 ©2011, Crawlability, Inc.