EX100sl No Sound

[Macabre]

Originally Posted by steve_shar

1. yes still doing it, no sound
2. factory reset
3. flashed with UFL_EX1000SL_24-02-09_nosort_DarX as well
4. rescanned
5. even tried using vcr scart from from eurovox to vcr still no sound

Makes me wonder if sound amplifier amp has gone on box

Audio just under the red button at the top is it not ?? or is that aux??


My mates was doing it and simple problem in the end but for the life of me can't remember what it was now .


Is it not the same as d box when you have to change the audio selection on some channels ??

[parricull]

Originally Posted by Macabre

Audio just under the red button at the top is it not ?? or is that aux??


My mates was doing it and simple problem in the end but for the life of me can't remember what it was now .


Is it not the same as d box when you have to change the audio selection on some channels ??

the AUX button? i dont even know what it does other than make the screen go black,lmao

[Macabre]

Originally Posted by parricull

the AUX button? i dont even know what it does other than make the screen go black,lmao

Well thanks for the useful info .


It is something simple and just trying to get my head round the control , The starview has the audio button and just trying to help the guy out .

[parricull]

you may have the sound set to low on your box and too high on your tv,just re-adjust your box to full (right key next to the ok button)

or

press red button twice and you get 2 options on an audio menu select the other option than it is as present,its worth a shot

[steve_shar]

Tried Audio on both
Signal is between 80 & 85

[unadkat]

Originally Posted by steve_shar

Tried Audio on both
Signal is between 80 & 85

test that box at a different adress and see what feedback you receive mate.

[parricull]

Do you have an isolater box on the wall? (white box) If not its looking like you may need one as buzzing noise may be caused by the feed not being grounded properly,you can get them from Maplins or even a V1rmen media van in the street,just slip him a few quid for a drink.You can usually relate it to a signal problem if you pull the feed out the box and the buzzing stops...

[steve_shar]

Tried at neighbours, with ex5100 an ex1000

As I previously said 5100 works perfect 1000 doesnt

[parricull]

Have you had any more luck yet mate,are you saying your getting the pulsating picture and buzzing in both yours and your mates houses?If so its highly likely to be a box or firmware fault,maybe try a different computer to flash the firmware and where you getting the firmware from?