Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers
|  Home   |  Forums   |  News   |  Blog   |  

Go Back   Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums > Other discussions > Motoring


 

Register Members List Search Today's Posts Mark Forums Read

Motoring All discussions about cars, other vehicles, and general motoring.

Reply
 
Thread Tools Search this Thread
Old 20-03-07, 03:12 PM   #1 (permalink)
tabby666
Member
 
 
Join Date: Aug 2006
Posts: 62
Thanks: 0
Thanked 1 Time in 1 Post
Default VW remote key fob programming guide

VW/AUDI/SEAT/SKODA



Remote Control Programming (1997 ON)

Procedure

1. Switch Ignition ON and leave the key in the ignition.

2. Mechanically lock the vehicle using the Drivers door using a second
key.

3. Using the remote control press the Unlock button once, and the horn
will sound once.

4. Wait 6 seconds and press the unlock button once to activate the coding
procedure. The remote control will now be programmed.

NOTE : When performing programming on additional remotes the procedure
is the same, except you press the unlock button 2, 3 or 4 times for the
different remote.

For example : If programming 2 remotes press the unlock button twice with
a 1 second interval between each press, repeat for 3 and 4 remotes.

5. Switch Ignition OFF.

6. Remove key from ignition and check for operation.

7. The coding procedure can be repeated up to 4 times for additional remotes.

8. The ignition must be switched OFF between programming each remote
control.

Remote Control Erasing (1997 ON)

Procedure

1. Switch Ignition ON and leave the key in the ignition.

2. Mechanically lock the vehicle using the Drivers door using a second
key.

3. Press the remote control unlock button 5 times in 1 second intervals.
A short horn will sound.

4. Wait 6 seconds and press the unlock button once to activate memory
erase.

5. Switch ignition OFF, all remot